Knucklebusters - Season 01

Thrash testing our Scrapyard M3 Build: Knuckle Busters FINALE!

Thrash testing our Scrapyard M3 Build: Knuckle Busters FINALE!

Season 1: Drift and Grip Started from the scrapyard, now we here. It's the Knuckle Busters FINALE! Danger Dan takes our E36 M3 project to the track for a grip and drift session to see how all tha...
Scrapyard M3 LIVES! How Much Power Does the V8 Make??

Scrapyard M3 LIVES! How Much Power Does the V8 Make??

Season 1: Drift and GripBrought to you by Edelbrock USA. Our Scrapyard M3 gets a fresh coat of paint and heads to the dyno - we're stoked to see this thing come to life!! Not much left to do to it...
Wider Fenders and Dual Throttle Bodies for our Scrapyard M3!

Wider Fenders and Dual Throttle Bodies for our Scrapyard M3!

Season 1: Drift and GripBrought to you by Edelbrock USA. Our scrapyard M3 gets chopped, riveted, and widened: all so we can fit that new much-wider-than-stock wheel and tire combo - as well as the...
Alignment Setup for Drift and Grip + our Scrapyard M3 Gets new Kicks!

Alignment Setup for Drift and Grip + our Scrapyard M3 Gets new Kicks!

Season 1: Drift and GripBrought to you by Edelbrock USA.Our grip/drift project M3 is starting to come together fast! Since we just got fresh kicks on the car (along with suspension), Danger Dan wa...
How an Angle Kit Works for Drifting

How an Angle Kit Works for Drifting

Season 1: Drift and GripBrought to you by Edelbrock USA.Danger Dan begins installing two of the more fun parts you can put on a drift car: a hoon stick (aka hydro handbrake) and an angle kit, focu...
How Low is Too Low for our Scrap Yard M3? Suspension and Differential Get Major Upgrades

How Low is Too Low for our Scrap Yard M3? Suspension and Differential Get Major Upgrades

Season 1: Drift and GripBrought to you by Edelbrock USA. [image-gallery] [image-gallery-end] EDELBROCK - http://www.edelbrock.com/52LB Compact Style Fuel Injectors - (Part number: 15907)Cross-Ram ...
Are Two Throttle Bodies Better Than One? Cross-Ram Intake Installation on our Scrap Yard M3?

Are Two Throttle Bodies Better Than One? Cross-Ram Intake Installation on our Scrap Yard M3?

On this episode of Knuckle Busters, Danger Dan starts final assembly on our refreshed LS now that it’s back from Edelbrock - and starts the process of fitting into the M3’s cleaned up engine bay. B...
NEW PROJECT CAR! Can We Save This Old M3 From the Scrap Yard?

NEW PROJECT CAR! Can We Save This Old M3 From the Scrap Yard?

Welcome to Knuckle Busters: the show where we take our builds to the next level by involving actual experts. In this episode, we introduce you to our new just-missed-the-junkyard BMW e36 M3 projec...